•It can decode the soft tag, give early warning to the hard tag, and has the sound and light alarm function.

•The maximum decoding height of the soft tag is 10CM. When decoding, please pass the tags one by one to ensure the decoding effect.

•There is a key, which is detected when the switch is not pressed, and detected and decoded when the switch is pressed.

1.Tag factory can use it to check the quality of the label detection;

2.Security staff can use i to check the goods with anti-theft labels, tags;

3.Tally man in supermarket can use it to check their position of anti-theft labels, tags and their quality of the protected goods;

4.Green light:Examination state,away from the EAS System
Red light:Horn sounds,detect the tag
Yellow light:Change the battery.

Take out the detector

Note: Make sure that the detector and the label are at the same frequency

Turn on the power switch, the green light is normally on

Note: the yellow light is on after the power is turned on, if it is not inducted, it means that the power of the power supply is insufficient

Close to the tag, the yellow light flashes and beeps when a tag with the same frequency is detected

Note: Different labels have different induction heights (about 10cm)